Brick Calculator: Brick, Mortar Bags and Wall Ties
Wall length, height, brick size and joint, and it returns the brick per square foot, the count with waste, the mortar in bags, the ties and the weeps. Every size here is the actual face dimension, so the count comes out of arithmetic rather than out of a table somebody copied.
When the figures look right, the brick material list downloads as a real PDF with your business details on it, built inside your own browser. Nothing you type is uploaded anywhere.
Worked example
These are the figures the calculator opens with and the answer it gives. Change anything above and every number below moves with it.
- Wall length40 ft
- Wall height9 ft
- Openings to deduct0 sq ft
- Brick sizeModular, 7 5/8 x 2 1/4
- Mortar joint0.375 in
- Waste allowance5 %
Brick to buy2,592 brick
| Net wall area | 360 sq ft |
|---|---|
| Brick per sq ft | 6.86 |
| Brick before waste | 2,469 |
| Courses | 42at 2.625 in per course |
| Mortar in the joints | 19.9 cu ft |
| Mortar to buy | 39.8 cu ftjoint volume doubled, see the assumptions |
| Mortar mix, 80 lb bags | 6737 brick per bag |
| Wall ties | 135 |
| Weep holes | 15 |
The material list this produces
| Brick | 2,592 |
|---|---|
| Mortar mix, 80 lb bags | 67 |
| Wall ties | 135 |
| Weep vents | 15 |
| Flashing, ft | 40 |
What this calculator assumes
- Sizes are actual face dimensions, not nominal. A modular brick is 7 5/8 by 2 1/4, and it is the 3/8 joint around it that makes up the nominal 8 by 2 2/3 the coursing is laid out from.
- This is a single wythe, which is what a veneer is. A solid two wythe wall is twice the brick and twice the mortar.
- Mortar is the volume of the bed and head joints across the bed depth of the brick, doubled. The doubling is not a fudge, it lands the bag count on the figure printed on the bag: an 80 pound bag of mortar mix yields about 0.6 cubic feet and lays roughly 37 modular brick.
- Wall ties are one per 2.67 square feet, which is 16 inches horizontally by 24 vertically, the spacing in TMS 402 for anchored veneer.
- Weep holes are one every 33 inches along the base course, which is the usual reading of the 33 inch maximum.
Brick per square foot is arithmetic, not a table
A modular brick is 7 5/8 by 2 1/4 actual. Add a 3/8 joint to each dimension and one brick occupies 8 by 2 5/8, which is 0.1458 square feet, which is 6.86 brick per square foot. That is where the number in every table comes from, and it is why the table stops being right the moment you change the joint or the size.
Queen brick at the same joint is 5.76 per square foot and utility is 3.00. On a 40 by 9 foot wall that is 2,592 modular, 2,178 queen or 1,134 utility, for exactly the same 360 square feet of wall.
Nominal names confuse this badly. A modular brick is called 8 by 2 2/3 because that is what it occupies with its joint, not what it measures. Measure one off the pallet if you are unsure, because the count follows the actual face.
The joint moves the brick count and the mortar in opposite directions
Widen the joint and you use fewer brick and more mortar. That 40 by 9 wall at a 3/8 joint is 2,592 brick and 67 bags of mortar mix. The same wall at a 1/2 inch joint is 2,437 brick and 85 bags.
That is 155 fewer brick and 18 more bags, and the bags are the cheaper of the two, so a wider joint usually saves money on material. It costs time, because a 1/2 inch joint is slower to strike and less forgiving of an uneven brick.
Three eighths is the default because it is what modular coursing is laid out around. Seven courses of modular brick with a 3/8 joint rise exactly 18 3/8 inches, which is why brick ledges, sills and window heights land where they do.
Mortar bags are the line that gets underbought
The joints on that wall hold 19.9 cubic feet of mortar. The order is 39.8, because roughly half of what a mason mixes never ends up in a joint: it furrows out, it squeezes past the brick and gets struck off, and it drops off the board.
Doubled, the figure lands where the bag says it should. Sixty seven 80 pound bags for 2,469 brick is 37 brick a bag, which is the coverage printed on a bag of type N mortar mix. That agreement is the check that the calculation is honest rather than optimistic.
Bagged mix and site mixed mortar are two different orders. This list gives you bags. If you are batching sand and masonry cement on site, work from the cubic feet line instead and let your supplier convert it.
Ties, weeps and flashing are the part an inspector looks at
A veneer is not a structural wall, it is a skin hung off one, and the ties are what hang it. TMS 402 puts anchored veneer ties at one per 2.67 square feet, which is 16 inches across by 24 up. On that 40 by 9 wall that is 135 ties, and they cost almost nothing next to a wall that has to come down.
Weeps go in the head joints of the base course at no more than 33 inches apart, which is 15 on a 40 foot wall. They are the only way water that gets behind the brick gets back out, and brick veneer always lets water behind it.
Flashing runs the full length at the base and over every opening, and it is on the list at the wall length for that reason. Weeps above flashing drain the cavity. Weeps without flashing drain nothing.
Questions people ask
How many bricks per square foot?
6.86 for modular brick with a 3/8 inch joint. Queen is 5.76, utility is 3.00 and king is 4.80.
How many bricks for a 40 foot wall?
A 40 by 9 foot single wythe veneer with no openings is 360 square feet, which at a 3/8 inch joint is 2,469 modular brick bare and 2,592 with 5 percent waste. Deduct the openings first: the same job with 60 square feet of windows and doors on a 30 by 8 wall is 1,296.
How many bags of mortar do I need per 1,000 brick?
About 27 of the 80 pound bags, working from roughly 37 modular brick a bag at a 3/8 joint. Widen to a 1/2 inch joint and it rises to about 36 bags.
Free Contractor Estimate Template, free, no signup, PDF Word and Excel.
Common sizes, worked out
The same calculator with the numbers already filled in, one page per size, each ending in its own material list.
More sizes, answered
Each row is this calculator run with those numbers when the page was built. Type the same numbers in above to see every line of the working.
| Example | What it assumes | Brick to buy |
|---|---|---|
| 50 sq ft | 50 square feet of wall face in modular brick, 3/8 in joints, five percent waste. | 360 brick |
| 60 sq ft | 60 square feet of wall face in modular brick, 3/8 in joints, five percent waste. | 432 brick |
| 80 sq ft | 80 square feet of wall face in modular brick, 3/8 in joints, five percent waste. | 576 brick |
| 10x10 wall | A wall 10 ft long and 10 ft tall in modular brick, 3/8 in joints, five percent waste. | 720 brick |
| 12x12 wall | A wall 12 ft long and 12 ft tall in modular brick, 3/8 in joints, five percent waste. | 1,037 brick |
| 400 sq ft | 400 square feet of wall face in modular brick, 3/8 in joints, five percent waste. | 2,880 brick |
| 450 sq ft | 450 square feet of wall face in modular brick, 3/8 in joints, five percent waste. | 3,240 brick |
| 500 sq ft | 500 square feet of wall face in modular brick, 3/8 in joints, five percent waste. | 3,600 brick |
| 600 sq ft | 600 square feet of wall face in modular brick, 3/8 in joints, five percent waste. | 4,320 brick |
| 700 sq ft | 700 square feet of wall face in modular brick, 3/8 in joints, five percent waste. | 5,040 brick |
| 750 sq ft | 750 square feet of wall face in modular brick, 3/8 in joints, five percent waste. | 5,400 brick |
| 900 sq ft | 900 square feet of wall face in modular brick, 3/8 in joints, five percent waste. | 6,480 brick |
| 1000 sq ft | 1,000 square feet of wall face in modular brick, 3/8 in joints, five percent waste. | 7,200 brick |
| 1200 sq ft | 1,200 square feet of wall face in modular brick, 3/8 in joints, five percent waste. | 8,640 brick |
| 1500 sq ft | 1,500 square feet of wall face in modular brick, 3/8 in joints, five percent waste. | 10,800 brick |
| 2000 sq ft | 2,000 square feet of wall face in modular brick, 3/8 in joints, five percent waste. | 14,400 brick |
| 2500 sq ft | 2,500 square feet of wall face in modular brick, 3/8 in joints, five percent waste. | 18,000 brick |
| 3000 sq ft | 3,000 square feet of wall face in modular brick, 3/8 in joints, five percent waste. | 21,600 brick |
| 5000 sq ft | 5,000 square feet of wall face in modular brick, 3/8 in joints, five percent waste. | 36,000 brick |